Check Out These Expert Tips to Help Prevent Household Leaks
Your water supply pipes probably aren’t something that frequently comes to mind, if at all. How nice to have a system in place that simply provides everything for you on demand.
Yet your plumbing system isn’t simple, it’s quite complex, and needs regular attention and care if it’s going to continue. It’s an on-demand service where water leak detection is better than repair. Check out these expert tips to help prevent leaks, and take better care of your plumbing system.
Identify and Stop Leaks
A little DIY maintenance can go a long way, and checking for leaks in your home will save you a lot of hassle later in life. Follow this checklist regularly to stay ahead of the game.
- Listen for running toilets.
- Check faucets, tubs, and sinks for surface water.
- Monitor your water meter readings. If the numbers don’t seem to match up to your usage, call a plumber to check for underground leaks.
- Periodically shut off the water and check the meter reading for spikes.
How to Prevent Pipe Corrosion
Corroded pipes are a nuisance, but a preventable one. There are easy ways to stop corrosion before it happens. Keep these tips in mind to avoid deteriorating water pipes.
- Avoid using chemical drain uncloggers.
- Use a water softener.
- Use screens on sinks, tubs, and showers.
- Install a phosphate feeder for copper pipes.
- Check water pH, as it should sit between 7.0- 8.0.
Shy Away From Chemical Clog Removers
They seem like a nice idea, but chemical clog removers are harmful to your pipes. Constant use of these chemicals will eventually lead to corrosion and leaks.
Next time you have a clog, pour half a cup of salt down the clogged drain, followed by boiling water. Flush it with hot water, and your clog should be cleared. If this doesn’t work, you can try using a drain snake.
Snaking the drain uses no chemicals and costs next to nothing. You can pick one up at any hardware store in San Diego, CA, for about $20.00. Snaking the drain will remove the clog, and maintain the quality of your pipes.
Time to Reduce the Water Pressure
Household water pressure should sit between 40 and 80 psi. Anything above 85 psi can cause damage to your pipes. If you start to notice water gushing out of your sinks or showerheads at full force, you could have a water pressure issue.
There are two options when faced with high water pressure in your home.
You can either:
- Purchase a pressure regulator, about $30.00 and install it to regulate your water pressure.
- Call a plumber to have the pressure regulator installed. Some of us would prefer to just call a guy. Either way, a pressure regulator will be the answer.
Now you know how easy it is to prevent household leaks, and take care of your plumbing system. Start using these expert tips today, and take a load off your mind.